I've searched but cannot find a link to camshaft part/casting numbers. I need to find a specific cam, and need to know what I am looking for as I search. TIA
Speedo
I've searched but cannot find a link to camshaft part/casting numbers. I need to find a specific cam, and need to know what I am looking for as I search. TIA
Speedo
registry# 1283
what cam do you need?
Mike
Tom Butler posted a list over on PP:
http://forums.pelicanparts.com/6358015-post2.html
andy
67S in pieces
EarlyS: 1358
[SIGPIC][/SIGPIC]
Andy...thanks.
Tom's spreadsheet is a great resource. Looking at it I am wondering why the right side cam for the 67-68 L, and the 69-73 E is the same part number (901 105 110 05), but the left sides are different? Also the same for the right side cam for the 69-73 S and the 2.7 RS (901 105 168 00)...left sides are different? I was always of the impression that the S profiles were all the same...Int-Ex-Duration-Separation. Those numbers all look very, very close. I am asking these questions as I just picked up another 69 S longblock which is missing the right side cam (missing a couple other things too) and I want to find the proper cam. Looks like any of the S cams will work , but the correct part numbered cam would be 901 105168 00. I do get the fact that the early S cams were not MFI and the later were...therefore the later S left side has the MFI drive on it...and a different part number as such. And yes Dave I will send you the engine serial number when the pallet arrives.
Speedo
registry# 1283
Aaron Burnham
Burnham Performance
1071 Avenida Acaso ste D.
Camarillo, Ca. 93012
805-240-6931
_________________________
Hi,
you can also take a look here:
http://www.porsche.com/germany/acces...artscatalogue/
Regards
Harald
I recently have run across a couple sets of NOS 964 camshafts with rather unusual part numbers:
964 105 247 86
964 105 248 86
964 105 247 83
964 105 248 83
964 105 247 84
964 105 248 84
I was told due to the last two numbers being double digit they are factory racing cams. I do have them sent out to WebCam to have them plotted, we'll see what comes back, has anyone seen these before?
Bernd Buschen
R Gruppe # 357
71' 914-6 Original Owner
70' 914-6 GT Stoddard Built
69' 911E Scott's car
70' 914-6 Sold
Here is an updated copy of the camshaft cross reference with a few more blanks filled in.
Regarding Lars' questions about the S vs RS profiles.....As best I know the profiles are the same for all early S and the RS cams. I do not know why the LHS RS cam has the unique P/N.
Tom Butler
1973 RSR Clone
1970 911E
914-6 GT Clone in Progress