... special 1968 rear seat belt attachment....

[andrea70]

At least i found it!! 3 years.... one of the rarest stupid item on this car...

Ok, it's not NOS, but it' s the real deal and now , with the correct dimensions, i can make a little reproduction run...
the problem will be the white plastic washer...

i have mounted it inside the original hole i cutted from my car to check the proper function...



from the original Spare Parts catalog ( ed VIII 1/69)




example from Revetlow 911r:

[68S_SK2]

Hi Andrea,

I would be very very happy if you would have found a 1968 rear screw for the front seat belt fixation. But I'm sorry to say, it isn't.
Here some pictures what it should look like.
I am also still looking for a set of these screws. If somebody could help, that would be great!!!!

Best
Claudius

[andrea70]

mmmhhh... Claudius...
i found them in an Italian umolested 68S....

i'll check with my original seat-bealt hooks...

please stay tuned..

ciao!

[Jim Breazeale]

2 different 68 shoulder belt attaching bolts and one from a 66/67. These bolts are only found in cars that were delivered in Germany or other places in Europe. Cars destined for the US got completely different seat belts and bolts. I believe Andrea's bolt is from a US delivered car with "ASE" shoulder belts.

Regards

Jim

[andrea70]

Exact Jim!

from left to right:
1) aluminium type ( wrong for 68, used till 66/67)
2) Hex type ( the real deal for 68) . It's identical to mine but the Claudius' photo says something different.....
3) chromed type (perfect for 67/68). I use this type on my car until i'll found the correct number 2) type....

i have 1) and 3) NOS

The one i posted i think is the number 2)...

we have to check better....

[andrea70]

thank you Raj.
can you misure the head of the bolt and the distance between the top of the head and the chassis?
ciao

[68S_SK2]

As I mentioned - welcome to the 1968 model year - speciality collection!!

Raj, if you could get us the measurements of the bolt, that would be perfect!!

Claudius

[Anatol]

That's what my 3.68S from Italy looked like in the rear:

[68S_SK2]

For all who like numbers:

The screw No1) up to FIN 308090, 355462, 462710, 500464, 550325

[Jim Breazeale]

Claudius

My bolt is different than the one you posted. Mine is used with a permanently mounted shoulder belt that uses a stamped steel end. The bolt you have pictured is for those beautiful Factory seat belts that have 3 of those, really cool, hooks at the end of both the lap and shoulder belts. I think I have one or two of those around there somewhere but can't find them. Yes they are not chrome plated like the bolt I have pictured.

Regards

Jim
PS: The picture is just an example of a permanently mounted shoulder belt but not particularly one for a 68.