Announcing 911 Brake Lines for SWB Cars

[Neunelfer]

Special thanks to Vinod Ramani and Tim Goodrich for getting all of the SWB single circuit master cylinder lines together for this.

We've begun making all of the lines for early 911 models. All the lines are 3D scanned and CNC bent for a perfect fit. They come in three basic materials: Stock tin coated steel. Stainless steel and later factory green coated steel.

I currently have the stock tin coated steel up on the site:

http://www.pmbperformance.com/911-brake-lines.html

More will be added as we get sample lines in and, as I get time...

[Jim Breazeale]

Eric

Do you stock rear crossover lines for 67S calipers?

Regards

Jim

[andrea70]

Photos?
Thanx

[Rick Cabell]

Do you plan to have 69-73 lines?

[Neunelfer]

@ Jim - Yes. We have those in OEM Steel, Stainless and OEM Green @ $24.95 - $34.95 and $44.95 per pair.

@ Andrea - I'll try. They are so hard to photograph and get a good shot. Lighting has to be perfect etc. and then each line x3 bla, bla, bla... which is why I resorted to using the PET diagrams.

@ Rick - Yes, ASAP. We're cataloging all of the lines we can get our hands on. If you have a complete set of unmolested lines send them on. PM me.

Going to offer a 10% discount for complete line kits as well

Stainless is an additional $10.00 per line
Later OEM Green is an additional $10.00 over stainless.

@ Admin - Thanks for the move

[718RSK]

Eric, I spoke to Tim but he couldn't tell. Are the fittings identical to the original ones also? A couple of years back I made a set of lines for one of my 356 cars and had to have them custom made as the current available ones are a bit different. Not sure if this is a problem on the 911's also