Nice and very rare 901 'H' 2nd Gearset for use with 904 Splined Mainshaft!
19:32 Ratio
Good condition; matched pair
$400
kindersport@gmail.com
Nice and very rare 901 'H' 2nd Gearset for use with 904 Splined Mainshaft!
19:32 Ratio
Good condition; matched pair
$400
kindersport@gmail.com
scott kinder
kindersport@gmail.com
Registry #614
9110220587 - 1973 RSR revival in progress
My Car Thread: "Five-Eighty-Seven..."
“If it isn't there, it didn't cost anything, it doesn't weigh anything and can't break." - From the philosophy of Grady Clay
Scott,Originally Posted by YTNUKLR
That is a very nice gear but not for a 904 mainshaft in 2nd, it would have 6 not 8 splines. I can post a photo of 904 gear for comparison if it helps.
Jon B.
Vista, CA
Woops! Sorry .
Jon, what else could it be ? A 915 gear possibly?
scott kinder
kindersport@gmail.com
Registry #614
9110220587 - 1973 RSR revival in progress
My Car Thread: "Five-Eighty-Seven..."
“If it isn't there, it didn't cost anything, it doesn't weigh anything and can't break." - From the philosophy of Grady Clay
It seems to be dated 5.65, too early for 915.
Could it be a H for 3rd from a 4spd on a regular 901 shaft?
Richard
Scott,
It's a stock "H" 2nd gear for a 4-speed 911/912 mainshaft, original to 902. It would fit in 3rd gear position on a 5-speed shaft, but is very low for a 3rd gear.
By the way, very good price on your "F" 2nd gear and mainshaft, which also applies to 70/71 911 and all 914, 914/6 transmissions.
Jon B.
Vista, CA
I have three of these welded "H" second gears running on vintage racers, so far no problems and they are run pretty hard. Fairly easy job.
Price drop to $175
scott kinder
kindersport@gmail.com
Registry #614
9110220587 - 1973 RSR revival in progress
My Car Thread: "Five-Eighty-Seven..."
“If it isn't there, it didn't cost anything, it doesn't weigh anything and can't break." - From the philosophy of Grady Clay
Posting Permissions
Reply With Quote