WTB: 2.2 Throttle body

[kllr901]

looking for a singe 2.2 MFI throttle body (Corrosion... no problem) or just the three linkage arms all by themselves.
Will consider anything!

Thanks, Ron

[hwgunner]

I have 3 arms that came of a 911T throttle body. Not sure of the year though. the rods include the ball sockets. 2 of them are roughly 130mm and the third is roughly 158mm. Let me know if this is what you are looking for. Thanks
P4255617.jpg

[kllr901]

Jonathan, I actually need the flat "arms" that are attached to the throttle shafts, those are the linkage rods that press onto the ball studs on the "arms".
Thanks for the reply, let me know if you have any of them please.

[hwgunner]

Well I do have an orphan sitting here. Had it for sale in another thread for $250.00 but that appears to be way off. What are the arms worth?? the stack becomes sort of worthless without them. Make me an offer, you never know what might happen. BTW are all the arms the same?? I think the stack i have is from a T and it is a Plastic stack. Let me know.

[kllr901]

the only T that used MFI was a 2.4 and they are different than the 2.2 liter cars. Send me an e-mail with a picture or post it here and i'll tell you if it will work.
thanks!

[hwgunner]

Here is a picture of the TB.
P5015619.jpg

[kllr901]

unfortunately it's a 2.4 style, sorry Jonathan. If you find any others please let me know.

Thanks!

[304065]

call Matt Blast at eurometrix.ws

[hwgunner]

Well, I tried. I will let you know if I find any others.

[kllr901]

Thanks all for the replies and offers, still on the hunt...