Need to find a part for a 1971 Porsche 911E

[VaporiZe]

Im working on fixing a 1971 Porsche 911e after the fork arm pivot pin broke (if thats what it's called). It is part number 5 in the link in the diagram from inside the transmission >>> http://forums.pelicanparts.com/uploa...1086723880.jpg Some how when that broke is caused a piece to fall off from the clutch cable and I need to replace it, but have no idea what the part is. The best I know is that it is part number 85 on the diagram in the link >>> http://forums.pelicanparts.com/uploa...1086711230.jpg If anyone knows what that part is or where I can get one, I would greatly appreciate it.

[66S]

looks like a rubber boot. stoddards diagram does not show that piece. ALWAYS replace that pivot ball pin with a clutch job unless you know it is relatively new.

[Jerry L]

I think there is a piece that fits between #83 and the fork I will look in the garage / car later, I changed all that a couple years ago on my 71, and bought spares as i was not too impressed with the plastic pieces although they have proven over many years on many cars.
will report back.

Regards

[VaporiZe]

I think I found the part, if it looks like this >>> http://www.ebay.com/itm/Rear-Porsche...item2c6ce33d57 then I know what the part is

[Alan.uk]

Also if changing the pivot pin be sure to fit a new leaf spring.

Alan