Need help with 28 Row external oil cooler tab

[Haasman]

I was fortunate to have just found a 28 row external oil cooler. The top single mounting tab is missing. Does anyone have a picture and/or dimensions of one that would help me in the creation and location of a new one?

Thanks.

[Cliff]

Here is one I have...

[Haasman]

Thanks Cliff. Very helpful. It seems it is angled off the face of the housing, but at 90 degrees +/- from the hose fittings?

[Cliff]

Let me get a couple more pictures.It does have some details that need viewing...cliff

[Haasman]

Thank you Cliff. Very helpful. I had no idea the tab is what appears to be two pieces. Any measurements would also be great.

Jeff

[RSTarga]

You'll need similar rubber cushions at the bottom too. Do you have the headlight bucket bracket?

[Haasman]

David- Thanks for this. I don't have the third rubber cushion but I'm lead to believe they are readily available. The bracket on the headlight .... good one. I don't know, I will have to look and see. Do you have any photos of this bracket.

[RSTarga]

I'll see if I can get under my car to take a picture. I'm pretty sure mine is custom and screwed onto the headlamp bucket. The 73 cars did not have the welded in bracket as on later cars. It should just be a tab that the top mount screw goes through. You'll actually need 2 rubber cushions at the base.

[RSTarga]

You might want to take a look at this thread, it looks like Elephant has a mounting kit.
http://forums.pelicanparts.com/porsc...ay-garage.html

[Haasman]

Thanks David. I will check that out. Nice overview and detail of parts required.

Jeff