FS: Weber parts carbs and a Zenith 40 TIN

[bdstone914]

Sale pending on Weber parts. Zenith still available.


I have a bunch of 40 Weber carbs that I would like to sell as a lot.

The best
One 40 IDT P13C. It was missing the auxiliary venturis but was otherwise a functional carb.
One carb marked 40IDS 3C. It has 46mm butterflies. Bare other than the throttle shafts and butterflies.

The worst.

Weber 40 IDA 3C1 and a 40IDA 3C. Both had stuck throttle shafts and many problems. I got the throttle shafts out by cutting them in sections. The previous owner broke off different plugs and covered them with JB Weld. I got the JB off and found the broken parts below. The large brass hex nuts are stuck. I do have two other tops with good plugs.'
They have seen water and will need a lot of work. I found the Pierce Manifolds has the throttle shafts for about $177 per carb. There are at least two good floats.

I would like $650 or best offer for all the Weber carbs and parts.

Last is a Zenith 40 TIN. it is missing the auxiliary venturies and a banjo bolt. Asking $100 for it

[bdstone914]

More Weber pictures

[bdstone914]

Zenith pictures

[haycait911]

I have a bunch of 40 Weber carbs that I would like to sell as a lot.

The best
One 40 IDT P13C. It was missing the auxiliary venturis but was otherwise a functional carb.
One carb marked 40IDS 3C. It has 46mm butterflies. Bare other than the throttle shafts and butterflies.

The worst.

Weber 40 IDA 3C1 and a 40IDA 3C. Both had stuck throttle shafts and many problems. I got the throttle shafts out by cutting them in sections. The previous owner broke off different plugs and covered them with JB Weld. I got the JB off and found the broken parts below. The large brass hex nuts are stuck. I do have two other tops with good plugs.'
They have seen water and will need a lot of work. I found the Pierce Manifolds has the throttle shafts for about $177 per carb. There are at least two good floats.

I would like $650 or best offer for all the Weber carbs and parts.

Last is a Zenith 40 TIN. it is missing the auxiliary venturies and a banjo bolt. Asking $100 for it

I'll take all the weber carbs and parts. please pm paypal info. Don.

[bdstone914]

Don,

Please contact me. Have sent several PM's to you.

Bruce

[haycait911]

pm sent Bruce.

my apologies for the delay to you Bruce, and anyone who was wanting these parts. at this point I'll have to pass.

and a bump for a great deal, the IDS body alone is worth the price.

[bdstone914]

Zenith sold, Webers still available.

Bruce