Pistons are 80mm std, rings are 1.5, 1.5, 4.0 sizes
Also need 12 new cir clips.
Anyone having some stash, or know whereabouts, greatly appreciated. Thanks
edit: beggars not choosers and all, no Deves.
Pistons are 80mm std, rings are 1.5, 1.5, 4.0 sizes
Also need 12 new cir clips.
Anyone having some stash, or know whereabouts, greatly appreciated. Thanks
edit: beggars not choosers and all, no Deves.
Last edited by Silverbullit; 01-09-2014 at 11:09 AM.
Brian
S Reg #1032
"I measured twice, cut three times, and it's still too short!"
I thought that you were going with JE's?
Incorrect dome for '67S. Upon inspection with my (uber-outstanding) machinist, we chose to "re-work" a good set of std. bore p&c.
Brian
S Reg #1032
"I measured twice, cut three times, and it's still too short!"
That's what I did...
I may be able to help. Let me go thru some boxes this weekend and see what I've got.
If you, like me, cant find an OEM 2.0S ring set it might be easier to buy two OEM sets for 911N which use 1.5 2.0 and 4mm rings to get a full set for 2.0S. Pelican has them.
Last edited by 66S; 01-08-2014 at 08:09 PM.
Rick the top ring has a different part number from the second ring. I'd have to get some out to see what the difference is.
The parts are still available individually I believe with the part numbers:
- 901.103.311.01 top
- 901.103.317.00 second
- 901.103.315.01 oil control
Pricey on PP. I've been able to source some sets in the past for around $50/set but never from Pelican, they once sent me a set of Deves when I ordered with the correct part number for the set 901.103.901.01.
andy
Last edited by ajwans; 01-09-2014 at 01:49 AM. Reason: got the part numbers mixed up
67S in pieces
EarlyS: 1358
[SIGPIC][/SIGPIC]
thanks Andy, I had planned on using a Deves second ring in place of the 2mm second ring but Id prefer all goetze rings.
Last edited by 66S; 01-09-2014 at 09:23 AM.
Perfect. Looking hard but not finding them. Do you have them? Any secret leads?
I appreciate the help!
Brian
S Reg #1032
"I measured twice, cut three times, and it's still too short!"
MAHLE GmbH
Birgit Albrecht
Corporate Communications/Public Relations
Pragstrasse 26–46
D-70376 Stuttgart
Germany
Phone: +49 (0) 711/501-12506
Fax: +49 (0) 711/501-13700
birgit.albrecht@mahle.com
xxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxx
Dear Neil:
You can contact any of the MAHLE distributors listed below for price and availability of your piston and ring needs.
Thanks for your interest in MAHLE products.
Kind Regards,
Gary Warner
MAHLE Clevite Inc.
Sales (Account Manager-Eastern Region)
1350 Eisenhower Place, Ann Arbor, MI 48108-3282 USA
Phone: +1 (315) 345-6615, Fax: +1 (315) 652-5980
Mobile: +1 (315) 345-6615
gary.warner@us.mahle.com, http://www.mahleclevite.com
EPI
18071 Fitch Ave.
Irvine, CA 92714
949 553-3900
Interamerican Motor Corp
8901 Canoga Ave.
Canoga Park, CA 91304
818 678-1200
KW Parts
2121 Blound Road
Popano Beach, FL 33069
954 973-8400
SSF Imported Auto Parts
466 Forbes Blvd.
South San Francisco, CA 94080
650 742-7050
Worldpac
37137 Hickory Street
Newark, CA 94560
510 742-8900
- Neil
'67 911S (Ol' Ivory)
'82 Hewlett Packard 34C
Early 911S Registry # 512