Guys
My 71 radio/trim was made to swing open for radio install, the upholstery is cut at end on the air/vent control unit…
The trim received for 70 is glued all the way across and the radio trim can be seen on the underside
Am I correct that cut needs to be made for the radio trim piece as the other photo?
Thanks for assistance
FrankName:  0AB3B369-F657-4CA6-8813-DD8ADCA2C103.jpg
Views: 229
Size:  33.1 KBName:  C12BF930-CB5A-4938-888B-1267B38D5BA3.jpg
Views: 225
Size:  34.4 KBName:  FEC35F36-CEAF-4805-B12C-6B2DFBF799FD.jpg
Views: 229
Size:  83.4 KBName:  12F30AF3-CF1A-4264-8C66-4A02370D84E3.jpg
Views: 219
Size:  87.6 KB