As I am preparing and working on the front fender of my 1972, I decided to see if a metal strip is available.
I tried searching the known parts suppliers, but I must have missed it.

Location:
Below the parking lights and is welded to the underside of the fender
It runs from hood to the end of the parking light.

Description:
It’s an L shape
Long side is 1/2 inch
Short side is 1/8 inch
Approx 20 inches long
It is an arc just like the parking lights

If it was straight, I could easily have it made. Due to it being curved, I am not sure I know anyone who can make it.

I tried taking pics, but they were worthless.

Any help is appreciated.
Thanks