Results 1 to 10 of 34

Thread: The cause of my handling problem?

Threaded View

Previous Post Previous Post   Next Post Next Post
  1. #1
    Senior Member Dezzmo's Avatar
    Join Date
    Nov 2006
    Location
    Rhode Island
    Posts
    471

    The cause of my handling problem?

    I've had this car on the road for 2 years now and since then I could not figure out why it would handle so poorly. It always felt like the rear tires were going flat. I was almost positive the problem was at the back of the car.

    I've had friends who own 911s drive my car and it would scare them! So I replaced all of the rear suspension bushing and torsion bars along with 2 sets of new tires and 3 alignments and corner balance but still no change.

    So I went to the front end of the car and replaced the steering rack, ball joints, strut inserts, and turbo tie-rods and still no luck! So one day while I was under the car I noticed a perfect cut in the undercoating that was forming right around the left front A-arm control mount. So I took a screwdriver and tried to scrape away some of the undercoating and it went right through the metal!

    As you can see from the pics the rust is evident mostly at the left front control arm mount on the suspension pan.

    I'm going to replace the suspension pan and fuel tank support to take care of this problem. Would there be anything else that I need to replace "while I'm in there"?
    Attached Images Attached Images     
    Tim G

    Early S Reg #1017
    RGruppe #663

    73 911T 3.2
    00 Ducati 996 Track Rat
    01 Ducati S4 Monster

Similar Threads

  1. Handling traits question for a novice.
    By haasad in forum General Info
    Replies: 8
    Last Post: 05-16-2013, 10:38 PM
  2. SWB better handling
    By 911DP in forum Technical Info
    Replies: 9
    Last Post: 01-31-2011, 07:27 AM
  3. '66 911 Handling
    By swcarroll in forum Technical Info
    Replies: 4
    Last Post: 12-12-2009, 10:30 AM
  4. Suspension: comfort versus handling
    By kenikh in forum General Info
    Replies: 75
    Last Post: 05-30-2008, 03:49 AM
  5. Sorting handling on a '67
    By AndyR in forum Technical Info
    Replies: 4
    Last Post: 08-31-2001, 05:12 AM

Posting Permissions

  • You may not post new threads
  • You may not post replies
  • You may not post attachments
  • You may not edit your posts
  •  

Message Board Disclaimer and Terms of Use
This is a public forum. Messages posted here can be viewed by the public. The Early 911S Registry is not responsible for messages posted in its online forums, and any message will express the views of the author and not the Early 911S Registry. Use of online forums shall constitute the agreement of the user not to post anything of religious or political content, false and defamatory, inaccurate, abusive, vulgar, hateful, harassing, obscene, profane, sexually oriented, threatening, invasive of a person's privacy, or otherwise to violate the law and the further agreement of the user to be solely responsible for and hold the Early 911S Registry harmless in the event of any claim based on their message. Any viewer who finds a message objectionable should contact us immediately by email. The Early 911S Registry has the ability to remove objectionable messages and we will make every effort to do so, within a reasonable time frame, if we determine that removal is necessary.