Results 1 to 10 of 802

Thread: Another hot rod

Threaded View

Previous Post Previous Post   Next Post Next Post
  1. #22
    Here we get a good look at the re-assembled twin plug cylinder heads that came on the engine.

    The casting dates on the heads are 2-72 and as a matter of interest to some, note that the casting numbers are all the same: 911.104.307.1R. Both the intake ports and exhaust ports had been opened up to 41mm as per the factory specifications for a high butterfly injected 2,5L "ST" engine, whether it be in long stroke 911/70 or short stroke 911/73 configuration.

    Third image shows the 93mm ANDIAL pistons and cylinders installed with two of the cylinder heads, seen from the intake side, slid onto the studs.

    The final image shows all the cylinder heads installed from the aspect of the exhaust side of the heads.
    Attached Images Attached Images     
    Last edited by Flunder; 12-29-2010 at 09:03 AM.
    Early 911S Registry
    Looking for engine 960 168
    Looking for gear box 103 165

Posting Permissions

  • You may not post new threads
  • You may not post replies
  • You may not post attachments
  • You may not edit your posts
  •  

Message Board Disclaimer and Terms of Use
This is a public forum. Messages posted here can be viewed by the public. The Early 911S Registry is not responsible for messages posted in its online forums, and any message will express the views of the author and not the Early 911S Registry. Use of online forums shall constitute the agreement of the user not to post anything of religious or political content, false and defamatory, inaccurate, abusive, vulgar, hateful, harassing, obscene, profane, sexually oriented, threatening, invasive of a person's privacy, or otherwise to violate the law and the further agreement of the user to be solely responsible for and hold the Early 911S Registry harmless in the event of any claim based on their message. Any viewer who finds a message objectionable should contact us immediately by email. The Early 911S Registry has the ability to remove objectionable messages and we will make every effort to do so, within a reasonable time frame, if we determine that removal is necessary.