Did my homework and read the collective knowledge. My question is "what does the final surface look like after dyeing, gelcoating etc."? The surface of the shroud look line a series of spider web cracks. However it is smooth to the touch. Could easily be seeing individual strands of the embedded fiberglass. Some of the threads have un refinished shroud pictures which appear somewhat similar but the resolution is not clear enough for me to confirm. When refinished should this me a solid surface as though it were painted. Here is the best I can do by way of a picture.Name: WP_20180526_13_55_40_Pro.jpg Views: 345 Size: 71.9 KBName: WP_20180526_13_55_46_Pro.jpg Views: 346 Size: 72.6 KB Surface is dirty but smooth to the touch. If those are cracks they are below the surface. Edge of the second picture show what I am talking about the most clearly