Results 1 to 4 of 4

Thread: FS: 356, 911 Manual Window Regulator Pivot Pins, 644.542.044.02

  1. #1

    FS: 356, 911 Manual Window Regulator Pivot Pins, 644.542.044.02

    These parts are used to repair 356A-SC, '65- 911 manual window regulators. The regulators are functionally similar to these SWB parts:

    WET '65-'69 911 Fig. 8/6, #54) 901.542.041.20 Window cranking mechanism, left, -302 921
    WET '65-'69 911 Fig. 8/6, #54) 901.542.041.21 Window cranking mechanism, left, 302 922 - 307 180
    WET '65-'69 911 Fig. 8/6, #54) 901.542.041.22 Window cranking mechanism, left, 307 181-

    WET '65-'69 911 Fig. 8/6, #54 901.542.042.20 Window cranking mechanism, right, -302 921
    WET '65-'69 911 Fig. 8/6, #54 901.542.042.21 Window cranking mechanism, right, 302 922 - 307 180
    WET '65-'69 911 Fig. 8/6, #54 901.542.042.22 Window cranking mechanism, right, 307 181-


    There are four versions of the pivot pins. They are identified by their overall length (23mm or 26mm) and relationship between the spring-holding slot and the mount's flat side (parallel or perpendicular).

    These parts feature an improved design which is made from stronger steel than the OEM parts. The pins are then heat-treated and zinc coated for corrosion protection. They can either be installed with a threaded fastener or welded/peened.

    Material: Chromoly steel
    Heat Treat: HRC 40
    Coating: Zinc I (Clear)
    Weight: 25.17 grams

    Each pin comes with these fasteners:
    * Hex head screw, M4, stainless
    * Washer, split lock, M4, stainless
    * Washer, flat, M4,, stainless

    The price of the pivot pin assemblies is $17.50 each. Shipping within the US is by USPS Priority Mail ($8.30) or Parcel Post ($5.50).
    International shipping is available, but performance is poor, requiring the purchase of insurance.

    Other available parts:

  2. #2
    Member Paul Shugert's Avatar
    Join Date
    Feb 2015
    Location
    Prescott Az
    Posts
    51
    Hello Jimmy,
    Are you still selling the Pivot Pins?
    I need (2) pins, 1 perpendicular pin and 1 parallel pin, 23mm overall length.
    Please PM or call me at 858-735-1313 for payment info.
    I am in Prescott AZ
    Last edited by Paul Shugert; 04-12-2022 at 08:02 AM.
    That's all folks...

  3. #3
    Member Paul Shugert's Avatar
    Join Date
    Feb 2015
    Location
    Prescott Az
    Posts
    51
    Jimmy,

    Received the (2) pivot pins yesterday.
    Great quality as usual.
    That's all folks...

  4. #4
    Senior Member Eric Gratz's Avatar
    Join Date
    Jul 2013
    Location
    Louisville, Kentucky
    Posts
    352
    Jimmy,
    I need a 23 mm perpendicular pin if these are still available.
    Thanks
    Eric
    Eric Gratz
    Early 911S member

    Parts wanted - Elephant hide seats, 71 911E engine 6211756

Posting Permissions

  • You may not post new threads
  • You may not post replies
  • You may not post attachments
  • You may not edit your posts
  •  

Message Board Disclaimer and Terms of Use
This is a public forum. Messages posted here can be viewed by the public. The Early 911S Registry is not responsible for messages posted in its online forums, and any message will express the views of the author and not the Early 911S Registry. Use of online forums shall constitute the agreement of the user not to post anything of religious or political content, false and defamatory, inaccurate, abusive, vulgar, hateful, harassing, obscene, profane, sexually oriented, threatening, invasive of a person's privacy, or otherwise to violate the law and the further agreement of the user to be solely responsible for and hold the Early 911S Registry harmless in the event of any claim based on their message. Any viewer who finds a message objectionable should contact us immediately by email. The Early 911S Registry has the ability to remove objectionable messages and we will make every effort to do so, within a reasonable time frame, if we determine that removal is necessary.