Original 906 seat just out of long storage. Would make a great homologation seat for the passenger side (see photo). Excellent original condition.
$SOLD
Please contact me directly.
dahearn67@gmail.com
Original 906 seat just out of long storage. Would make a great homologation seat for the passenger side (see photo). Excellent original condition.
$SOLD
Please contact me directly.
dahearn67@gmail.com
Last edited by Rennman; 05-24-2024 at 02:23 PM.
Hen’s teeth!!
------------------------------------------------
1971 911T/ restoring to S-spec Coupe / Gold Metallic on Black
1995 911 C2 / Guards Red on Cashmere Beige (Sold)
never seen such a seat in a 906......the profile of the rails is kind of correct but they are modified/butchered for more head space or to fit in something else.
Last edited by moito; 05-24-2024 at 04:20 AM.
Stunning seat Don,
Thank you for offering this seat on the registry. Very very rare with original basketweave upholstery.
Thank you. This has sold
It is a 906 seat. It came from a very late car and if it was modified, it was done so in the mid-70s. The former owner was quite tall.
It is possible that it was recovered, but it would have been done in the early 70s. It is also possible that it came from a very early 910 now that I think about it. It originates from an individual that had a very late 906 and very early 910 so it could have come from either. It was on a shelf for a very long time and I don't recall. The center basket weave section was not glued and the fiberglass pan had a large rectangular hole cut into the bottom right side. You can just it in the photo. I assumed for the oil line in the 906, however this line was removed in that particular car. It also had an oval handle to adjust the seat position (it's been removed) rather than a circular one in the frame pic you posted.
thanks for clarification
my assumption it was fitted in something else than a 906 also came from the oil line issue the low seat position would have created...
in adition to the altered seat rails i also think (i also could be wrong)the fiber glass pan was repositioned(lowered) ..since the way it is bonded to the frame is also nothing i`v seen so far
attached a foto of the seat material i know..
the seat rail i posted a foto of came off a very late 906--one of the most original 906 on this planet
I agree that the covering is not what I have seen before in a 906, which is one of the reasons I parted with it. It was suggested to me that it is a 907 seat, but I have a 907 seat and it is different. I still believe it is a 906 or possibly a 910 seat and if it was altered, it was done a long time ago.