Any1 using a dead pedal for spirited street/track driving that has the appearance of a close to stock looking item. Prefer black not SS or aluminum finish.......just came across a nice looking piece on the R.Booth website...TIA
Any1 using a dead pedal for spirited street/track driving that has the appearance of a close to stock looking item. Prefer black not SS or aluminum finish.......just came across a nice looking piece on the R.Booth website...TIA
Joel,
Got mine 15 years ago from Allan Johnson Motor Storts ... It may now be known as AJ-USA...
Formed sheet metal in factory zinc-green finish ... I sprayed it satin black, bolted it in, and put some ribbed rubber on the face...
Hope this helps,
Chuck Miller
Creative Advisor/Message Board Moderator - Early 911S Registry #109
R Gruppe #88
TYP901 #62
'73S cpe #1099 - Matched # 2.7/9.5 RS spec rebuild
'67 Malibu 327 spt cpe - Period 350 Rebuild
’98 Chevy S-10 – Utility
’15 GTI – Commuter
Chuck, thanks...does it just bolt in over carpet into sheet metal?......
Ya Joel,
It through-bolts into the inner wheel well about half way down and just in from the gas fill overflow tube ... I used small black button-head allan screws on the inside and washers and nylock nuts in the wheel well...
The dead pedal puts your foot in a very natural and comfortable posision ...
If I'm not shift'n that's were my left foot is.......
Chuck Miller
Creative Advisor/Message Board Moderator - Early 911S Registry #109
R Gruppe #88
TYP901 #62
'73S cpe #1099 - Matched # 2.7/9.5 RS spec rebuild
'67 Malibu 327 spt cpe - Period 350 Rebuild
’98 Chevy S-10 – Utility
’15 GTI – Commuter
AJ has some nice ones in black for a fair price..thanks again .......
Here's one Joel-
Zitronengelb R1012 the RatBasterd
RGruppe #183
another one-
Zitronengelb R1012 the RatBasterd
RGruppe #183
Hey Jens.....those are oe dead pedals?....do you know from what vintage /model cars?....TIA
Just kidding Joel, yup part # 901.501.825.00, called "foot rest for driver's left foot" (on LDH cars). They were at least as early as '68. On *vehicles used for sports purposes*.
On my driver I use a black anodized unit made by Rennline here in Vermont. Very nice piece. I'm saving the new factory piece for my '68 lightweight.
Zitronengelb R1012 the RatBasterd
RGruppe #183
i'm with Jens on this one. i have a NOS factory dead pedal that i purchased from msroadrace.
_B
Sent from a pay phone
888888 eL, Oph'eL'ia
Instagram: werk_crew
www.werkcrew.com
www.werkcrew.tumblr.com
www.handofwinter.tumblr.com