WTB: SWB electrical parts

[freezing14]

For a 1968 911 targa
Looking to buy the original style ballast resistor for the engine electrical plate
Also looking to buy a horn relay /ballast relay
And fuel pump L bracket that goes between the plate and pump
Prefer from canada but USA ok

[dirk07]

Hi,

which Bosch Number do you need exactly?

Dirk

[tom1394racing]

I should have most of these parts. PM me with your email for details

[freezing14]

pm sent about a week ago, something must have gone the way of the gremlins , no reply yet , here are the picture of what I need
you can try my email at freezing914 at gmail dot com

thanks

Yves

[tom1394racing]

Freezing

Sorry for the delay. I have the two in the lower picture. Sunset Porsche lists the one in the upper photo.

http://www.sunsetporscheparts.com/oe...he/90160285200

[freezing14]

I would definitely take the fuel pump bracket
The relay needs to be the black.one
It is used at 2 places. Engine plate and webasto
Do you have the original style ballast resistor

[tom1394racing]

freezing

I have several of these ballast resistors. I do not have the black relay.

[doigthom]

Double check but I think in '68 they used the later style ballast resistor. Not the box with the knurled access nut. Experts please check me.

[moito]

Double check but I think in '68 they used the later style ballast resistor. Not the box with the knurled access nut. Experts please check me.

my last production week of my 68 had the the box type.

[dirk07]

-68 box type
MY 69 cylinder style ballast resistor