WTB: seat belt mount

[georgepvalerio]

Hello I need the seat belt mount from the right side seat. This 1 is from left seat.
Bolts between seat and rail.I would also like the bolt and spring washer.
Don't care about finish it will be redone.

Thanks George

Eurosportgpv@gmail.com

[moito]

i think there is two different versions that look almost identical but they are not and you will need the correct bolt/washer combo for it otherwise the seat belt will not move freely

[dirk07]

Franz. There is only a left and a right version which is identically for both front seat.
The washer type and the position of mounting changed with the Press receivers.

Normally belt and buckle do not move freely at these mounting points, when mounted correctly
I got plenty of those, George. How much do you need?

[moito]

Franz. There is only a left and a right version which is identically for both front seat.
The washer type and the position of mounting changed with the Press receivers.

Normally belt and buckle do not move freely at these mounting points, when mounted correctly
I got plenty of those, George. How much do you need?

there is definitely different versions for the mount..possibly just a revised version that does not carry its own part#..one has a slightly longer thread.
different bolt lenght and different washers... both mentioned in the parts catalog if i remember correctly
with moving freely i should have been more precise--better therm-movable.end of story.